Echoflex Installation Guide
Magnetic Contact Sensor
Magnetic Contact Sensor (MC-31)
Page 8 of 12
Echoflex
Operating Mode
The Operating Mode determines what type of event will trigger the MC-31
to send a message. Minimizing transmissions conserves battery power,
which may be a consideration in high-activity installations.
1. Press and hold the
[Teach]
button until the white LED blinks twice.
2. Press and release the
[Teach]
button to cycle through the menu of
color LEDs and stop when the red LED double-blinks.
3. Press and hold the
[Teach]
button until the white LED blinks twice to
select Operating Mode.
The red LED blink code displays the current setting. Press and release
the
[Teach]
button to navigate the options.
4. Press and hold the
[Teach]
button until the white LED blinks twice
when the target indication displays. The MC-31 saves the setting and
then restarts.
The Operating Mode does not affect transmission of the configured
heartbeat message. The two transmission settings are independent.
To exit before time-out, press and hold the
[Teach]
button until the white
LED blinks twice.
Indication
Setting
Behavior
1 red blink
Every open or
close event
(default)
Sends
Contact Open
message
when the contact goes from
closed to open. Sends
Contact
Closed
message when contact
goes from open to closed
2 red blinks
Open events only
Sends
Contact Open
messages
3 red blinks
Close events only
Sends
Contact Closed
messages
