Echoflex Installation Guide
Magnetic Contact Sensor
Magnetic Contact Sensor (MC-31)
Page 7 of 12
Echoflex
EEP Select
The default EEP setting is configured to work with Echoflex controllers. The
MC-31 can be configured to be compatible with controllers that use an
alternate profile.
1. Press and hold the
[Teach]
button until the white LED blinks twice.
2. Press and release the
[Teach]
button to cycle through the menu of
color LEDs and stop when the blue LED double-blinks.
3. Press and hold the
[Teach]
button until the white LED blinks twice to
select EEP Select.
The blue LED blink code displays the current setting. Press and release
the
[Teach]
button to navigate the options.
4. Press and hold the
[Teach]
button until the white LED blinks twice
when the target indication displays. The MC-31 saves the setting and
then restarts.
Indication
Setting
1 blue blink
A5-30-02 (default)
2 blue blinks
D5-00-01
