Echoflex Installation Guide
ElahoAccess Interface
Note:
When installing a multi-gang wall plate to Elaho products: if the
Elaho product is not aligned with the back box, the wall plate will not
attach properly.
Loosen the screws that secure the Elaho product to the back box, adjust
each product to improve the alignment, secure the screws, then retry wall
plate installation.
Bluetooth
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected
•
Consult the dealer or an experienced radio/TV technician for help
ElahoAccess Interface Installation Guide
Page 7 of 8
Echoflex Solutions, Inc.
