background image

X7502257007

9

© 4/2016 ECHO Inc.

SHC-225/S

SAFETY

• Keep your body warm, especially the head, 

neck, feet, ankles, hands, and wrists.

• Maintain good blood circulation by performing 

vigorous arm exercises during frequent work 
breaks, and also by not smoking.

• Limit the hours of operation. Try to fill each 

day with jobs where operating the unit or other 
hand-held power equipment is not required.

• If you experience discomfort, redness, and 

swelling of the fingers followed by whitening 
and loss of feeling, consult your physician 
before further exposing yourself to cold and vibration.

Repetitive Stress Injuries (RSI)

It is believed that overusing the muscles and 
tendons of the fingers, hands, arms, and 
shoulders may cause soreness, swelling, 
numbness, weakness, and extreme pain in 
those areas. Certain repetitive hand activities 
may put you at a high risk for developing a 
Repetitive Stress Injury (RSI). An extreme RSI 
condition is Carpal Tunnel Syndrome (CTS), 
which could occur when your wrist swells and 
squeezes a vital nerve that runs through the 
area. Some believe that prolonged exposure to 
vibration may contribute to CTS. CTS can cause 
severe pain for months or even years.

To reduce the risk of RSI/CTS, do the following: 

• Avoid using your wrist in a bent, extended, or twisted position. Instead try to 

maintain a straight wrist position. Also, when grasping, use your whole hand, 
not just the thumb and index finger.

• Take periodic breaks to minimize repetition and rest your hands.

• Reduce the speed and force with which you do the repetitive movement.

• Do exercise to strengthen the hand and arm muscles.

• Immediately stop using all power equipment and consult a doctor if you feel 

tingling, numbness, or pain in the fingers, hands, wrists, or arms. The sooner 
RSI/CTS is diagnosed, the more likely permanent nerve and muscle damage 
can be prevented.

Summary of Contents for SHC-225/S













































Reviews: