Echo POWER PRUNER DPPT-2600H Operator'S Manual Download Page 6

Page: 6 / 52

SAFETY

DPPT-2600H

X7508310101

International Symbols

Note: Not all symbols will appear on your unit.

Read the Manuals

• Provide all users of this equipment with the Operator’s Manual and Safety

Manual for instructions on Safe Operation.

Clear the Work Area

• Spectators and fellow workers must be warned, and children and animals

prevented from coming nearer than 15 m (50 ft.) while the unit is in use.

Keep a Firm Grip

• Always hold throttle handle and support handle with thumbs and fingers

tightly encircling the handles.

Symbol

Description

Symbol

Description

Warning, See

Operator’s Manual

Direct Current

Wear Eye, Ear and

Head Protection

Do not expose to rain /

water

Wear Hand and Foot

Protection

Do not operate closer

than 15 m (50 ft.) from

electrical hazard.

Safety/Alert

Chain Lubrication

Disconnect battery

before maintenance

Correct chain installation

direction

Summary of Contents for POWER PRUNER DPPT-2600H





















































Search results

Summary of Contents for POWER PRUNER DPPT-2600H

Reviews:

Related manuals for POWER PRUNER DPPT-2600H

Brands by name

Popular brands

Echo POWER PRUNER DPPT-2600H, Operator'S Manual

Search results

Summary of Contents for POWER PRUNER DPPT-2600H

Reviews:

Related manuals for POWER PRUNER DPPT-2600H

Brands by name

Popular brands