background image

4

Physical Condition 

Your judgment and physical dexterity may not be good:                        

•  if you are tired or sick,                       

•  if you are taking medication, 

•  if you have taken alcohol or drugs.

Operate unit only if you are physically and mentally well.

Eye Protection 

Wear eye protection that meets ANSI Z87.1 or CE re-

quirements whenever you operate the unit.

Hand Protection

Wear no-slip, heavy-duty work gloves to improve your 

grip on the handles.  Gloves also reduce the transmission 

of machine vibration to your hands.

Hearing Protection

ECHO recommends wearing hearing protection whenever 

unit is used.

Vibration and Cold --

It is believed that a condition called Raynaud’s Phenomenon, which affects the fingers of certain individuals, may be 

brought about by exposure to vibration and cold. Exposure to vibration and cold may cause tingling and burning sen-

sations, followed by loss of color and numbness in the fingers. The following precautions are strongly recommended, 

because the minimum exposure which might trigger the ailment is unknown. 

•  Keep your body warm, especially the head, neck, feet, 

ankles, hands, and wrists.

•  Maintain good blood circulation by performing vigor

-

ous arm exercises during frequent work breaks, and 

also by not smoking.

•  Limit the hours of operation. Try to fill each day with 

jobs where operating the unit or other hand-held power 

equipment is not required.

•  If you experience discomfort, redness, and swelling of 

the fingers followed by whitening and loss of feeling, 

consult your physician before further exposing yourself 

to cold and vibration.

personal

 

condItIon

 

and

 

safety

 

equIpment

  

  WARNING

Trimmer/Brush Cutter users risk injury to themselves and others if the trimmer/brush cutter is used improperly and 

or safety precautions are not followed.  Proper clothing and safety gear must be worn when operating a trimmer.

Proper Clothing 

Wear snug fitting, durable clothing;

•  Pants should have long legs, shirts with long sleeves.

•  DO NOT WEAR SHORTS,

•  DO NOT WEAR TIES, SCARFS, JEWELRY.

Wear protective hair covering to contain long hair.                                                     

Wear sturdy work shoes with nonskid soles;

•  DO NOT WEAR OPEN TOED SHOES,

•  DO NOT OPERATE UNIT BAREFOOTED.

Keep long hair away from engine and air intake. Retain 

hair with cap or net.

Hot Humid Weather

Heavy protective clothing can increase operator fatigue 

which may lead to heat stroke. Schedule heavy work for 

early morning or late afternoon hours when temperatures 

are cooler.

Summary of Contents for GT-200R - 12-08

























Reviews: