21
DHC-2300
99922238005
© 01/2023 ECHO Incorporated
TROUBLESHOOTING
TROUBLESHOOTING
Problem
Cause
Solution
The motor does
not start when
you pull the
trigger switch.
The battery is not
installed tightly.
Make sure that you tighlty
install the battery in the ma-
chine.
The battery is out of
power.
Charge the battery.
The front handle
operator presence
switch is not engaged.
Engage the front handle
operator presence switch.
The machine
smokes during
operation.
The machine has
damage.
1. Immediately stop the
machine.
2. Remove the battery.
3. Contact your dealer.
The motor is on,
blades do not
move.
The machine has
damage.
Do not use the machine and
contact your dealer.
The blades are
blocked.
Remove battery then clear
blockage from the blades.
There is too
much
noise and/or
vibration
during opera-
tion.
The parts are loosen. 1. Stop the machine.
2. Remove the battery.
3. Inspect for damage.
4. Check and tighten loose
parts.
The parts have
damage.
Do not use the machine and
contact your dealer.
