4
6 INCH CHIPPER
SAFETY
1.9 SAFETY DECALS
Keep hands and feet out of inlet and discharge
openings while machine is operating to avoid serious
personal injury. Stop and allow machine to come to a
complete stop before clearing obstructions.
Read and understand this owner/operators
manual. Be completely familiar with the
controls and the proper use of this equipment
Obtain and wear safety glasses and use
hearing protection at all times when operating
this machine.
Before inspecting or servicing any part of this
machine, shut off power source, remove the
key, disconnect spark plug wire from spark
plug and make sure all moving parts have
come to a complete stop.
Do not operate this equipment in the
vicinity of bystanders. Do not allow
children to operate this equipment.
Always stand clear of discharge area
when operating this machine. Keep
face and body away from discharge areas.
Do not operate machine without shields in place.
Failure to do so may cause serious injury or death.
Check blade bolts for proper torque
after every 8 hours of operation.
Check blades and rotate or
resharpen daily or as required to
keep blades sharp. Refer to owners
manual for instructions. Failure to
do so may cause poor performance, damage or personal injury and will
void the machine warranty.
Read and understand you owners manual before operating. If owners
manual was not included or you have any questions, please call
800.247.7335 or 701.282.5520 (U.S.A.).
See Section 1.10 for decal locations. Familiarize yourself with all of the safety and operating decals on the machine
and the associated hazards. See the engine owner's manual or contact the engine manufacturer for engine safety
instructions and decals.
Keep hands and feet out of inlet and
discharge openings while machine
is operating to avoid serious
personal injury. Stop and allow
machine to come to a complete stop
before clearing obstructions.
1
6
2
7
3
4
5
PN 12169
PN 12172
PN 12173
PN 12174
PN 12175
PN 14942-00
PN 12250
Do not operate this equipment in the vicinity
of bystanders. Do not allow children to
operate this equipment. Always stand clear
of discharge area when operating this
machine. Keep face and body away from
discharge areas. Rotate the discharge tube
over the hitch before towing and lock securely in place.
350 kPa, 50 psi
P205/75R14
68
150
9
10
8
Feed roller support must be
secured in the up position prior
to servicing chipper feed area.
The feed roller can fall and
cause severe bodily harm. Consult owners manual for proper method of
securing feed roller support. Lower feed roller before operating chipper.
PN 32109-00
PN 32155-00
PN 18983-00
