![background image](http://html.mh-extra.com/html/ecg/xms-1111-u/xms-1111-u_instruction-manual_531289061.webp)
GB
60
61
60
61
Note regarding magnetically unshielded speakers
This appliance is not magnetically shielded and can cause color shift on the screen of some TV sets or monitors.
In this case, the device should be placed farther away from the TV to prevent color distortion.
USING THE SYSTEM
Turning the device on and off
1. Press the button
POWER
1
in the standby mode on the device or on the remote control. The LCD display
shows icon of the last selected input source.
2. If you want to turn the device off, press again the button
POWER
1
on the device or on the remote
control. The LCD display darkens and a clock appears.
Note:
If the device is not used for 20 minutes it switches automatically to standby mode.
Setting the clock (only from the remote control)
After connecting the power adapter, the LCD display shows flashing “12:00”.
1. When the device is in standby mode, press the
CLOCK SET
button on the remote control. The time format
12HOUR appears and the number “12” will continue to flash.
2. Using buttons
/
select between 12h and 24h format and confirm by pressing
SELECT
. The hours
begin to flash.
3. Using buttons
/
set the hour. Hold for faster change.
4. Press
SELECT
to confirm the set hour. The minutes start to flash.
5. Using buttons
/
set minutes. Hold for faster change.
6. Press again
SELECT
to confirm the set time. The clock is now set.
Note:
In the event of a power failure the clock of the device and the preset radio stations must be set again. The
display will flash “12:00”, indicating a power outage. Set the clock by repeating the procedure described above.
Finding time (only the remote control)
The clock is shown in the standby mode on the display of the device. If you want to find out what time is it
when the device is on, press
CLOCK SET
on the remote control. The current time appears for 5 seconds and
then the screen returns to the original display.
Set the alarm clock (only on remote control)
The device allows to set the alarm using CD playback, radio or buzzer.
1. When the device is in the standby mode, press
ALARM1
or
ALARM2
. The display shows alarm time AM
12:00. Press again and hold
ALARM
, the alarm hour starts flashing.
2. Using buttons
/
set the desired hour and confirm by pressing the button
SELECT
. The minutes start
to flash.
3. Using button
/
set minutes and confirm by pressing
SELECT
. The display will show the source of
the alarm.
4. Using buttons
/
select between CD, radio or buzzer and confirm by pressing
SELECT
. The volume
level starts flashing.
5. Using buttons
/
set the alarm volume and press
SELECT
to end the alarm clock setting.
Notes
•
The device has two independent alarm clocks available, which you can set using buttons
ALARM1
or
ALARM2
.
•
If you select alarm using a CD and at the time of alarm there is no CD inserted, the device will use buzzer
as the alarm.
•
If you select alarm using radio, the device tunes the last received station.
XMS 1111 U_manual_cz_sk_pl_hu_de_gb_hr_si_sr_fr_it_es_et_lt_lv.indb 61
17.07.2016 16:00:44
Summary of Contents for XMS 1111 U
