![background image](http://html.mh-extra.com/html/ecg/pm-3151/pm-3151_instruction-manual_531286033.webp)
33
EN
USING THE APPLIANCE
•
Never use the appliance without the attached cleaning pads.
•
Never use the appliance with empty water tank.
•
Do not overfi ll the water tank to prevent an undesirable increase in pressure.
•
Do not point the appliance at other people, animals or electrical and electronic devices.
•
Do not use on leather, waxed and polished furniture, non-impregnated wood, synthetic fabrics, velvet or
other delicate steam-sensitive materials.
•
Do not use on non-impregnated wooden fl oors or fl oors made of cork tiles, because the heat and steam
may damage these surfaces. Be cautious when using on laminate fl oors and use the lowest steam setting.
•
Test it always on a small area of the fl oor before using it on the whole area.
•
Never apply the steam too long on one place. The surface of the fl oor may be damaged.
•
Be especially careful when applying it to PVC fl oors, linoleum or any other heat sensitive materials. Too
much heat could melt the adhesive of the fl ooring.
•
Do not use on the carpets without inserted carpet attachment.
•
Never pour hot water in the water tank or any other liquids, for example aromas or preparations containing
alcohol or detergents. The operation in such a case would not be safe and could cause damage to the
appliance.
C
D
E
F
G
Lowering the handle
Lift the handle up and lock it in place. When you want to lower the handle again, press two locking buttons
[C]
and push the handle down
[D]
. Use the handle
[E]
to lift and carry the appliance.
Filling the water tank
Before fi lling with water, make sure the mop is disconnected from the power supply. Remove the tank plug and
using the measuring cup fi ll the water tank with clean, cold water and replace the plug
[F]
.
Note:
The water tank is completely removable in case that you prefer fi lling the removed tank. See following
instructions.
Water tank removal
Make sure that the mop is disconnected from the power supply prior to removal or installing the water tank.
Remove the water tank by pulling upward. Remove the water tank and its base
[G]
, fi ll the tank or empty it and
return it in place.
Summary of Contents for PM 3151
Page 2: ......