![background image](http://html1.mh-extra.com/html/ecg/ms-100-white/ms-100-white_instruction-manual_3966871006.webp)
GB
6
7
Standard
mode
press
go to
snooze
selection
between
CH1, 2, 3
hold
-----
delete the
current
channel
Time
settings
press
-----
-----
hold
-----
-----
Setting
alarm
press
-----
-----
hold
-----
-----
OPERATION
Standard mode
1. Hold down the "SET" button to go to the time setting.
2. Press the "ALARM" button to turn on / off the alarm.
3. Press and hold the "ALARM" button for 2 seconds to open the alarm
setting.
4. Press the "UP" button to change the 12h / 24h time display.
5. Press the "DOWN" button to change the temperature display in °C / °F.
6. Hold down the "DOWN" button for 2 seconds to start RCC reception.
7. Press the "CH " button to switch RF, CH1 channel
CH2
CH3
CH1.
8. Hold down the "CH" button for 2 seconds to delete all data of the current
"Channel".
9. If the ALARM sounds, you can extend the sleep time by 5 minutes by
pressing the "SNZ" button.
Setting the time
1. Hold down the "SET" button for 2 seconds to open the clock setting.
2. The display flashes at a frequency of 1 Hz during setting.
3. Setting the time; time zone
hours
minutes
year
month
day
language
end.
4. Press the "SET" button to confirm the setting.
5. One press of the "UP" button increases the value by 1 step; after holding
down the button for 2 seconds it increases by 8 steps / seconds.