![background image](http://html1.mh-extra.com/html/ecg/ms-004-l/ms-004-l_operating-manual_3961997039.webp)
38
EN
39
To install the outdoor sensor on appropriate surface, set the hanger from bellow or from rear in case of
hangingonthewall.
DCF siGNAL RECEPTioN AND iNDiCATioN
Afterturningon,thedevicebeginstoreceiveDCFsignal.
iconflashes.
PoorornoDCFsignal
(only
v
iconflashes)
PowerDCFsignalreception
(
iconflashes)
Sufficientreception
(
iconlights)
Poorreception
(
icondisappears)
Remark:
 Whiletimesignalisreceived,nobuttonsonthedeviceoperateexceptingsnoozeandlighting
buttons.
DCF TiME siGNAL RECEPTioN
After DCF time code reception, the device automatically sets clock at exact time. The clock attempts to
receiveDCFsignaleverynightat01:00,02:00,03:00,and04:00orpossiblyfurther.AfterDCFsignalreception
till03:00,receptionisinterruptedtill01:00nextday.
TobeginmanualDCFreception,hold
WAVE / – (°C/°F)
for2seconds.TostopmanualDCFreception,hold
WAVE / – (°C/°F)
for2seconds.
DiARY, sECoND TiME ZoNE, 12/24 TiME FoRMAT sETUP
1. Hold
sET / ALM sET
buttonfor2seconds;yearfigureformatchangesinto2011andYrindicatorflashes.
Tosetyear,press
+/-
button.
2. Bynextpressing
sET / ALM sET
button,monthfiguresbegintoflash.Tosetmonth,press
+/-
button.
3. After next pressing
sET / ALM sET
 button, date figures flash. To set date, press
+/-
 button. By next
pressing
sET
button,timefigureschangeintoflashing
00
.Toselecttimezone,press
+/-
button:
“00”=GMT+1hour(i.e.CzechRepublic)
“01”=GMT+2hours(i.e.Finland)
“-01”=GMT00(i.e.GreatBritain)
4. Bynextpressing
sET / ALM sET
button,timefigureschangeinto
24Hr
andflash.Toselect12/24time
format,press
+/-
button.While12Hroptionisselected,
AM / PM
indicatorisshown.
5. Afternextpressing
sET / ALM sET
button,hourfiguresflash.Tosethours,press
+/-
button.
Summary of Contents for MS 004 L
Page 2: ......