![background image](http://html1.mh-extra.com/html/ecg/mk-103/mk-103_instruction-manual_3866766021.webp)
GB
21
Window seal assembly
1. Measure the window size
2. Adjust the length of the sealing strip so as to fi t the size of the window. After determining the length of the
sealing strip, fi x the set size using screw
A
.
3. Install the strip with fi xed length in the window.
4. Screw (counterclockwise) the exhaust hose assembly with the round connector to the hot air exhaust on
the rear side of the air conditioner
B
.
5. Attach the fl at neck of the exhaust hose assembly in the sealing strip in the window and secure with
screws
C
.
A
B
C
Beware of incorrect installation:
•
Good throughput of the exhaust hose is very important. Incorrect installation
aff ects the performance of the air conditioner.
•
Avoid excessive bending of the exhaust hose during installation.
•
Ensure smooth airfl ow through the hose.
Notice:
The length of the exhaust hose was specially designed for this model. Do not
replace the hose arbitrarily or extend it since this could easily lead to impaired
function or failure of air conditioning.
Note:
Maximum stretched length of the exhaust hose is 1,5 m. Try to keep the length as short as possible during the
operation. We recommend that the hose is installed as straight as possible.
Remote control
Insert batteries into remote control before use:
1. Push to remove the cover of the battery compartment.
2. Insert two new alkaline batteries. Keep the correct polarity of the batteries
marked in the battery compartment.
3. Replace the battery space cover.
Note:
Use exclusively alkaline batteries in the remote control. Do not use rechargeable batteries or other battery
types.
Replace both batteries in the same time. Do not combine old and new batteries or batteries of various types.
If you do not use the air conditioner for longer time, remove the batteries from the remote control.
Attention:
In the event of battery leakage, wipe the battery compartment so as to prevent corrosion inside the remote
control. Be careful. The electrolyte is corrosive and can cause skin burns or other health risks. In case of splash
on skin or clothing immediately rinse the aff ected area with water. In case of accidental swallowing see
a physician.
MK 103_manual_cz_sk_gb_hr.indb 21
1.2.2016 12:09:28
Summary of Contents for MK 103
