![background image](http://html1.mh-extra.com/html/ecg/mk-092/mk-092_instruction-manual_3868060044.webp)
44
EN
Cleaning the handle and the remote controller compartment
1. Remove the remote controller from its compartment in the direction indicated by the arrow (see fi g. 18).
Remote
controller
Remote controller
compartment
Fig. 18
2. Clean the handle and remote controller compartment with a slightly moist soft towel. Prevent water
dripping into the device.
3. If you need to place the remote controller back into its compartment for storage, insert the remote
controller in a manner opposite to the removal process.
DRAINING WATER
Manual draining: (see fi g. 19)
1. When the device is switched off during the water fi lling process, turn the power switch off and disconnect
the power cord.
Note:
move the device carefully to prevent water pouring out of the container in the bottom part of the
device.
2. Place a water container under the water drain on the back side of the device.
3. Unscrew the drain lid, remove the stopper and water will be drained into the container that will
automatically retain the water.
Note:
Protect the drain lid and stopper and gently tilt the device back when draining water. If the water
container cannot hold all of the water in the device, apply the stopper to the water drain to prevent
water leaking on the fl oor or carpet.
4. After the water is completely drained, apply the stopper and fi rmly close the drain lid.
Note:
Turn the device on only with the stopper and drain lid properly installed; otherwise the water
condensing in the device will leak onto the fl oor or carpet.
Water discharge
Drain lid
Stopper
Fig. 19
Continuous draining:
1. Unscrew drain lid in the direction indicated by arrows and remove the stopper (fi g. 19).