![background image](http://html1.mh-extra.com/html/ecg/mk-092/mk-092_instruction-manual_3868060041.webp)
41
EN
The ambient temperature rises to ≥17°C, the compressor is switched on again.
Remote controller
5
6
7
8
9
0
1
2
3
4
Fig. 14
1. High (High speed): switching the fan speed to high (apart from drying and sleep modes).
2. Low (Low speed): switching the fan speed to low.
3. Sleep (Sleep mode): switch the device to sleep mode.
4. Timer: if the device is off , press this button to confi gure the time at which the device should switch on. if
the device s on, press this button to confi gure the time at which the device should switch off .
5. TEMP up/down: reducing/increasing the temperature or timer value.
6. Cool: switch to cooling mode.
7. Dry: switch to dehumidifi cation mode.
8. Fan: switch to fan mode.
9. °C/ F: switch between Celsius and Fahrenheit units.
10. Power (ON/OFF): switching the device ON/OFF.
Note:
1. The remote controller only works up to a distance of 8 metres from the device and there should be no
obstacles between the device and controller.
2. Use 2 AAA/1.5 V alkaline batteries and mind the polarity when inserting them into the remote controller.
3. If you do not plan to use the remote controller for a longer period of time, remove the batteries to prevent
the air-conditioner spontaneously starting or leaking batteries that would damage the remote controller.
4. Always remove both batteries.