![background image](http://html.mh-extra.com/html/ecg/kv-130/kv-130_instruction-manual_531261031.webp)
31
EN
Imperial system:
Short push
UNIT
Short push
UNIT
Short push
UNIT
Weight addition and tare function
This function allows to weigh gradually added ingredients. Place the fi rst ingredient on the scale, its weight
appears. Reset by pressing
Z/T
before adding next ingredient, the display will show zero (“0”). This operation
can be repeated as often as you please.
Situation 1: “ZERO” function
When the sum of all weights on the scale is ≤4%
The LCD after each pressing of the
Z/T
button displays“— —” or “0 g”. Display
of “— —” means that it is not ready, please wait a moment. Display of “0 g”
together with “0” in the bottom left corner of the LCD display, means active
“ZERO” function. The maximum load capacity remains unchanged.
Situation 2: “TARE”
When the sum of all weights on the scale is >4%
The LCD after each pressing of the
Z/T
button displays “— —” or “0 g”. Display
of “— —” means that it is not ready, please wait a moment. Display of “0 g”
together with the symbol “TARE” in the upper right corner of the LCD display
means active “TARE” function. The maximum load capacity is lower by the
weight of all the ingredients on the scale.
Time reset
When you want to enter the clock setting mode, press the
T-SET
button for 3 seconds when clock is displayed.
Press
T-SET
for 3
seconds
Press
T-SET
to confi rm and
continue with minutes
Press
T-SET
to confi rm
Press long
to increase the speed of numbers change
Setting the timer
In the weighing mode:
Press
Press
to set time interval
T-SET
The countdown
will start
Press
T-SET
In the clock setting mode:
Press
Press
to set time interval
T-SET
The countdown
will start
Press
T-SET
1. When setting a time interval, press the
T-SET
button to confi rm the entered value and you will move to
next number. After entering the time interval, press
T-SET
to start the countdown. You can cancel the set
interval any time during the countdown by pressing
T-SET
.
2. When the timer counts down to “00:00”, an audio signal will sound (60 beeps) and the scale will return
automatically to clock display.