![background image](http://html.mh-extra.com/html/ecg/kt-10/kt-10_instruction-manual_531074030.webp)
GB
30
to 8 years old may not insert the plug into the outlet, regulate and
clean the appliance or perform user’s maintenance.
Do not immerse in water!
WARNING:
This heater is not equipped with a device for measuring the
room temperature. Do not use the heater in small rooms
occuppied by individuals that are not capable of leaving
the room without assistance, unless proper supervision is
available.
CAUTION:
Some parts of this product can become very hot and cause
burns. Special attention has to be paid in the presence of
children and handicapped people.
DO NOT COVER!
WARNING:
To prevent overheating, do not cover
the heater.
OPERATING INSTRUCTIONS
When you first turn the ceramic heater on, you may detect a slight odour. This is not a malfunction. This is
common with most heaters, it is harmless and it disappears in a little while, after dust or grease residue, which
settled there after a longer period of inactivity or during the manufacturing process, burns off.
Controls
While observing the above safety instructions, plug the heater in a suitable electrical outlet and switch it on.
Functions switch
Position
Functions
OFF
Off
FAN
Only fan, heating off
I
Low heating output
II
High heating output
Using the device as a fan
1. Turn the functions switch to FAN position. The fan will blow air into the room at room temperature.
2. If the fan does not switch on, that means that the temperature in the room is lower than was set as
a switching off temperature for the built-in thermostat. Turn the thermostat control clockwise, until the
fan starts.
3. Once the fan starts, the LED indicator on the front of the device will light up.