EN
34
EN
35
OPERATING INSTRUCTIONS
Place the induction stove on a flat, level and non-metallic so that the air inlet/outlet vents are not
covered. The distance between the induction stove and wall must be at least 12 cm. Connect the cable
into the electrical outlet, all indicators will flash and a sound can be heard.
1) ON
By pressing the ON/OFF button you will switch on the induction cooker. You will hear a beep and
the display will show „--“. Place a pot or pan on the cooking zone you intend to use. After pressing the
on/off button , press the for heating button within 1 minute. The heating will switch on to the
default power level of 6 along with an indicator light next to the heating button . The fan will switch
on. If you do not take any action within 1 minute, the induction cooker will beep every 2 seconds and
then it will switch to a standby mode. By pressing the on/off button again you will switch the cooker
back on.
The induction cooker detects automatically if you are using proper cookware. If yes, the heating button
will stop flashing and the cooker will switch on. Otherwise, a beep will sound and a warning sign
E1
will appear on the display. After 30 seconds, the cooker will automatically switch to standby mode.
Moving a finger along the finger slide can set the output level. To increase the output – move from left
to right, to lower the output – move from right to left.
Right induction zone power
Displayed
1
2
3
4
5
6
Power (W):
500
(interrupted mode)
1000
1200
1400
1600
2000
Left induction zone power
Displayed
1
2
3
4
5
6
Power (W):
500
(interrupted mode)
900
1000
1100
1300
1400
After you are finished with cooking, switch the cooker off by pressing the on/off button . The fan
will continue to work for a while longer to cool the appliance. When the fan stops, disconnect the
appliance from the power outlet and let it cool entirely.
2) Setting the temperature of pot/pan.
After switching it on and setting the output level, you can set the temperature. You can find the real
temperature of the pot/pan by pressing the temperature button
. The cooker will start with the
default temperature of 180°C, the indicator next to the button will light up and the fan will start
working.
You will lower/increase the temperature by moving a finger along the finger slide. The range of
temperature settings is between 60-240°C, altogether there are 12 setting levels.
If you will press the temperature button before you would put compatible cookware on the cooker,
a beep will sound and a warning sign
E1
will appear on the display. After 30 seconds, the cooker will
automatically switch to standby mode.
