![background image](http://html.mh-extra.com/html/ecg/iv-18/iv-18_instruction-manual_531090047.webp)
47
GB
47
Warning code
Possible cause
Solution
EO
An unsuitable pot/pan is on the
induction zone or the diameter of the
pot/pan is less than 12 cm.
Place suitable cookware on the cooktop.
E1
Bad connection of the induction hob/
faulty electrical circuit.
Contact an authorized service center.
E2
Problem with the temperature sensor. Contact an authorized service center.
E3
Voltage is too high.
Check the power source, turn on when the
power source returns to normal.
E4
Voltage is too low.
Check the power source, turn on when the
power source returns to normal.
E5
Protection against overheating – the
cooktop is too hot.
Wait few minutes until the appliance cools;
check the pot/pan.
E6
Problem with the fan, the air intake/
outflow is blocked.
When the appliance cools down, clean the
openings. Afterwards, restart the appliance.
If the problem persists, contact an authorized
service center.
TECHNICAL SPECIFICATIONS
Ceramic glass cooktop
Quick heat-up time and energy saving
Minimal heat loss
Suitable for 12–24 cm diameter cookware
Extra large LED display
10-stage temperature control (60 °C – 240 °C)
10-stage power setting (200–1800 W)
1 to 180 minute timer
Touch control
Automatic safety cut-off after cookware is set aside
Overheating and surge protection
Power on indicator
Nominal voltage: 220–240 V~ 50/60 Hz
Nominal input power: 1800 W
Noise level: <40 dB
Summary of Contents for IV 18
Page 111: ......