![background image](http://html1.mh-extra.com/html/ecg/edf-6023-wa-series/edf-6023-wa-series_instruction-manual_530975011.webp)
English
English
11
What is necessary to consider:
1. You should make sure prior to using these products that the hardness of your water allows the use of the
tablets (see the recommendation of the manufacturer on the product package).
2. These products should be used exactly according to the manufacturer’s instructions.
3. If these combination products are in tablet form, never place them freely into the dishwasher or the cutlery
basket. Put them always in the detergent dispenser.
4. If you encounter problems when using the product “3 v 1” contact the customer support of the tablets
manufacturer.
Notes:
•
If you want to achieve better results when using combined detergent products fill the dishwasher with salt
and rinse aid and set the water hardness and rinse aid dosage to lowest values.
•
The solubility of the detergent tablets from different manufacturers can vary depending on temperature
and time, therefore we do not recommend using these detergents in short programs. Powder detergents
are preferable for shorter programs.
When you decide not to use the detergent tables any more
1. Fill the salt and rinse aid dispensers.
2. Set the water hardness to the highest level and run a washing program on empty.
3. Set the correct water hardness value.
4. Set the matching rinse aid dosage.
Rinse aid
The rinse aid function
Rinse aid is automatically dispensed for the final polishing process and prevents spotting and streaking
upon drying. Contrary to widespread opinion, it is used not only to achieve more polished dishes, but it also
increases the efficiency of drying. Therefore you should take care that in the dispenser is sufficient amount of
the rinse aid.
Fill and set the rinse aid dispenser
1. Open the dispenser by turning the lid and then remove the lid
1
.
2. Pour carefully the rinse aid in the dispenser, until the rinse aid level indicator
2
darkens.
3. Insert the lid back and turn it to tighten it in place.
4. If after washing are on the dishes drops of water or chalky stains, increase the rinse aid
dosage. If there appears on the dishes white, sticky spots or on the knives and glass
bluish coating, reduce the rinse aid dosage. You can set the dispenser
3
in the range
1 to 6. The dispenser is set by the manufacturer to level 3.
When to add the rinse aid
Dark indicator
B
means that there is enough rinse aid in the dispenser, while light
indicator
A
warns about the necessity to add rinse aid in the dispenser.
Notice
•
Wipe with absorbent cloth the rinse aid spilled during replenishing, to prevent excessive
foaming during the next wash. Use only brand name rinse aids for the dishwasher. Do
not fill the rinse aid dispenser with other substances. The dishwasher could be damaged.
1
3