![background image](http://html1.mh-extra.com/html/ecg/edf-4516-qa/edf-4516-qa_instruction-manual_3906472067.webp)
GB
67
TROUBLESHOOTING TIPS
BEFORE CALLING THE SERVICE
The commendations in the following table may help you solve the problem. If the problem persists, contact
an authorized service center.
Problem
Possible cause
Corrective action
The dishwasher does
not start.
There is a blown fuse or
a tripped circuit breaker.
Replace the fuse or switch back the breaker. Disconnect all
electrical appliances plugged into the same outlet circuit.
The power is not on.
Make sure the dishwasher is turned on and the door is properly
closed. Make sure that the power cord plug is securely plugged
into the wall outlet.
Too low water pressure
Make sure the water supply is connected properly and the
intake valve is open.
The drain pump does
not stop
Overfl ow
The system is designed to detect an overfl ow condition. In this
case, the circulation pump stops and the drain pump starts.
Noise
Certain sounds are normal
during washing
Sound of opening the lid of the detergent dispenser.
Dishes are not properly
secured in baskets or a small
object fell into the basket.
Make sure that all the dishes in the dishwasher are properly
secured.
Motor noise
The dishwasher was not used regularly. If you rarely use the
dishwasher, do not forget every week to fi ll and drain water to
prevent drying of seals.
Foam in the
dishwasher tub
Wrong detergent
Use only detergents designed for automatic dishwashers. In
the case of foam, open the dishwasher door and let the foam
evaporate. Pour into the tub about 4.5 litres of cold water.
Close the dishwasher and run the program “soaking” to drain
the water. Repeat if necessary.
Rinse aid overfl ow
Wipe the spilled rinse aid immediately.
Coloured interior of
the tub
Detergent with dye was used.
Make sure that the detergent used does not contain dyes.
The dishes and cutlery
are not clean
Unsuitable program was
selected
Select a more intensive program.
Improper loading of dishes in
the baskets
Make sure that the eff ects of the detergent dispenser and
spray arms are not blocked by large dishes.
Spots and fi lm on
glasses and cutlery
1. Very hard water
2. Low temperature
3. Too many dishes in the
dishwasher
4. Incorrectly loaded dishes
5. Old or wet detergent
6. Empty rinse aid dispenser
7. Incorrect dosage of the
detergents
Removing spots from glass:
1. Remove all metal cutlery
2. Do not replenish detergent
3. Select the longest program
4. Run the dishwasher and let it run for about 18 to 22 minutes
before coming into the main wash.
5. Open the door and pour in 2 cups of white vinegar.
6. Close the door and let the dishwasher fi nish the program. If
the vinegar does not help: Repeat the above procedure, but
instead of vinegar, use 1/4 cup (60 ml) of citric acid crystals.
Coating on glassware.
The combination of soft water
and an excessive amount of
detergent.
If you are using soft water, use less detergent for glass washing
and select a shorter program.
Summary of Contents for EDF 4516 QA+
