![background image](http://html1.mh-extra.com/html/ecg/acr-5570/acr-5570_instruction-manual_3864502037.webp)
GB
37
Water tank locked
(
pict. 1
)
Water tank
unlocked (
pict. 2
)
Pulling out the tank
(
pict. 3
)
Filling with water
(
pict. 4
)
•
Only use pure cold tap water without chemical additives in the tank.
•
The water in the tank can be supplemented with ice cubes or pre-frozen cooling inserts for better efficiency.
Notice
•
The tank must be filled with water at least up to the mark of the
minimum water column level. Do not exceed the maximum height level
at the same time.
•
To prevent damaging the pump, insert the cooling inserts
into the left
compartment only, see picture
.
•
Do not leave the water in the container for more than one day so that
unwanted bacteria, micro-organisms, or fungi do not start to grow.
•
The first time you use the appliance you may smell a slight odor and the
water in the tank may become slightly cloudy. This is quite normal and
does not indicate any damage of the appliance and does not endanger
your health.
CLEANING AND MAINTENANCE
Do not use chemical cleaners for cleaning.
Always unplug from the socket before cleaning. Otherwise there is a risk of electric shock.
•
Wipe the dust from the surface of the appliance using soft cloth. If the surface becomes dirty, mix warm
water with a bit of neutral detergent, clean the surface and dry thoroughly.
•
Never use gasoline, thinner or other substances that could damage the surface of the appliance.
Air and water filer cleaning
If the air filter becomes clogged with dust, it will have a negative impact on the efficiency of the appliance.
Therefore clean the air filter at least once a month.
1. First, pull out the air filer. Then it will be possible to pull out also the water filter (see picture below).