![background image](http://html1.mh-extra.com/html/ecg/acr-5570/acr-5570_instruction-manual_3864502036.webp)
GB
36
TIMER
Use the TIMER button to set the
timer function
for an automatic shutdown. By repeated pressing you can
choose a time interval to shutdown
1, 2, 4 or 8 hours
. The set time is indicated by lighting the appropriate
indicator light on the control panel. The countdown starts immediately after setting of the time interval.
Turning off the appliance will not be announced by any audio signal.
Note:
The time remaining until the device is switched off is signalled by the indicator lights on the control
panel turning on gradually. For example, if you set the TIMER to 8 hours, the indicators above the 4, 2
and 1 hours light up in order.
OSCILLATION
The OSCILLATION buttons are for
setting the air flow direction
or rotating of the direction of the air valves
vertically or horizontally. To activate the desired rotation mode, press the button with the desired direction
icon. Oscillation is indicated by lighting up the relevant control panel indicator light.
a. If you press both OSCILLATION buttons in the same time and hold at least 3 seconds, you can
deactivate
sound alarms
. To activate the sound alarms, press and hold both buttons again simultaneously for
at least 3 seconds.
b. Once the appliance is in operation, the air outlet valves are continuously positioned at an angle of
127 degrees. As soon as you activate horizontal rotation with the OSCILLATION button, the valves will
rotate within a range of 60-127 degrees. After the appliance has been switched off, the valves should
always be fully lowered.
Note:
You can set simultaneous horizontal and vertical air flow.
Attention
•
If no button is pressed for 1 minute during setting, the appliance returns to normal operating mode.
•
The air filter cleaning reminder function lights up the red indicator after 100 hours of operation. If you press
and hold the COOLING button after the red indicator lights up, the indicator goes off and the reminder is
suppressed.
•
The
ionization indicator is not on
during operation. The correct ionization function is signaled by flashing
the lights (5x) when the instrument is switched on by the ON/OFF button.
•
The air cooler has a memory function, which means that the mode in which the appliance is switched off
will be active even after it is turned on.
WATER TANK
Before filling the tank with water, disconnect the appliance from the power supply and brake the wheels.
If you want to use the cooling function with humidification, it is necessary to fill the water tank. To fill it with
water, unlock the water tank lock first, pull the tank out, fill the water into it, and slide the tank back into its
original position and lock securely. The process is shown on
pictures 1–4
below.