29
EN
B:
Scanning through stored stations
Press
F/PS
shortly to scan through stored stations. Stations in the FM band will be scanned under FM mode,
stations in the AM band will be scanned under AM mode.
6. Local
stations
Press
SEL
, repeatedly until “LOC” appears on the display. Turn the
VOL
dial and select “LOC ON” or “LOC OFF”.
a:
LOC ON indicates the local reception mode is enabled.
b:
LOC OFF indicates remote stations will also be received. Depending on the region in which the system is
being used, local or remote reception can make receiving radio broadcasting easier.
7. Receiver
Reset
When the system is off , press and hold
MOD+BND
for 3 seconds. The receiver will be reset and all previously
stored stations will be erased.
RDS
1. AF – Alternative Frequency
Press and hold
SEL
, the system will select the strongest FM signal of the tuned station, therefore you do not
have to tune to another station when travelling through diff erent coverage regions. The system is receiving
RDS information when the AF light is on. When AF is fl ashing, the RDS information has not yet been loaded.
2. TA
–
Traffi
c Announcement
Press and hold
TA
to activate receiving traffi
c announcements from local radio stations.
To select a TA mode, press and hold
SEL
for 2 seconds, TA SEEK will appear on the display. Turn the volume dial
to toggle between TA SEEK and TA ALARM and once you have made a selection, allow the system to activate
the selected mode. Under TA SEEK mode, the system will search for traffi
c announcements once TA is pressed,
under TA ALARM mode, TA/TP will appear and only alarm announcements will be active.
3. PTY – Program Type
The system allows you to select a specifi c type of program and searches for a station broadcasting this type
of program. Press
PTY
once to display music genres. Then press either button
1-6
to select from the available
genres.
Press
PTY
twice to display programs with spoken work content. Then press either button
1-6
to select from the
available types. Each numerical button allows you to choose from three types of programs.
RDS-EON controls
This system is equipped with the newest EON feature (Enhanced Other Networks). When listening to the radio
or CD, and a traffi
c report is available from a nearby local station, the radio already knows the frequency of this
station and tunes into this station and increases the volume. CD playback is interrupted and the radio tunes
to the traffi
c announcement station for the duration of the traffi
c announcement. Once the traffi
c report has
ended, the system will return to its previous mode and is ready to receive the next traffi
c announcement.
USB/SD
Attention:
•
Before playing content on this system, backup any important data stored on the memory card or USB
memory device. Any unauthorized operations can result in data loss. The system manufacturer is not liable
for any loss of data.
1. MP3/WMA playback from USB/SD
Insert the USB memory device / SD card into the USB / SD card slot. If there are no MP3 or WMA fi les on the USB
device or SD card, “USB PLAY” or “SD MMC” will appear on the display.
2. Playback
mode
You can select USB or SD/MMC mode by pressing
MODE
. “USB PLAY” means the system is in USB playback
mode, whereas “SD/MMC” means the system is on SD card playback mode.
