![background image](http://html1.mh-extra.com/html/ecg/24hsl231m/24hsl231m_instruction-manual_3940586009.webp)
English
English
9
•
HbbTV
High Dynamic Range (HDR) / Hybrid Log-Gamma (HLG)
With this feature, the TV can reproduce a greater dynamic range of luminance by capturing and then combining
several different exposures. HDR/HLG promises better image quality with brighter, more realistic highlights,
more realistic colours and other improvements. It delivers the look that the filmmakers were trying to achieve,
allowing hidden areas of dark shadows and sunlight to come through with full clarity, color and detail. HDR/
HLG content is supported via native and portal applications, HDMI, USB inputs and via DVB-S broadcasting.
Included accessories
•
Remote controller
•
Batteries: 2 x AAA
•
Operating manual
•
DC 12V Input Power Adapter
•
Car plug
Emergency notifications
If the TV does not receive any signal (e.g. from an antenna or HDMI source) for 3 minutes, it will switch to
standby mode. When the TV is switched on again, the following message appears: "The TV automatically
switches to standby mode because it hasn't received any signal for a long time." You can disable this feature by
setting the
No signal timer
option in
Settings
>
Devices
accordingly.
The
Automatic TV off
option (in
Settings
>
System
>
More
) can be set to between 1 and 8 hours by default.
If this setting is not set to Off and the TV has been left on and not operated after the set time has elapsed, it
will switch to standby mode after the set time has elapsed. When the TV is switched on again, the following
message appears: "The TV automatically switches to standby mode because no operation has been performed
for a long time." A dialog box appears before the TV switches to standby mode. If you do not press any
buttons, the TV will switch to standby mode after 5 minutes. To immediately put the TV into standby mode,
highlight the
Yes
button and press
OK
. If you highlight
No
and press
OK
, the TV will remain active. You can also
deactivate the
Auto Shutdown
feature in the dialog box. Mark
Disable
and press
OK
, the TV will remain active
and the function will be cancelled. You can re-enable the feature by changing the settings for
Auto Power Off
in
Settings
>
System
>
More
.
CONTROL BUTTONS AND TV OPERATION
Note:
The position of the control buttons may vary depending on the model.
1. Direction up
2. Direction down
3. Volume/Info/Source list selection and Standby-On switch
The control switch allows you to control volume/programs/resources and standby
functions on the TV.
To change the volume:
Press the button upwards to increase the volume. Press the
button downwards to reduce the volume.
To change channels:
Press the middle button and a channel information banner
will appear on the screen. Press the up and down buttons to move between the stored programmes.
To change the source:
Press the middle button twice (second time in total) and the channel information will
be displayed. Press the up and down buttons to move between the available sources.
Turning off the TV:
Press and hold the middle button for a few seconds to switch the TV to standby mode.
Turning on the TV:
Press the centre of the control button and the TV will switch on.
Notes:
•
If you turn off the TV, this circuit starts again, starting with the volume setting.
•
The OSD main menu cannot be displayed using the control buttons.