![background image](http://html1.mh-extra.com/html/ecg/24hsl231m/24hsl231m_instruction-manual_3940586012.webp)
English
English
12
Plugging into outlet
IMPORTANT:
The TV is designed to operate on 12 V DC. Therefore, an adapter is used that gives a voltage of 12
V. Connect this adapter to a mains supply that delivers 100-240V AC, 50/60Hz.
After unpacking, allow the TV to reach room temperature before plugging it in.
1. AC adapter
2. DC 12 V input terminal connection
Important safety information
Ensure correct earthing of the wiring
Using the included power cord, connect the ground terminal of the AC adapter to the ground terminal
of the power outlet. If the cable end cannot be inserted into the mains socket, consult an electrician
about replacing your old socket.
Don't forget to connect the ground.
Antenna connection
Connect the antenna or cable TV plug to the ANTENNA INPUT (ANT) jack or connect the satellite to the
SATELLITE INPUT (LNB) jack on the front side of the TV.
The back of the TV
1. Satellite
2. Antenna or cable
Warning:
To connect a device to the TV, make sure the TV and the device are
switched off before making any connection. Once the connection has been made,
you can switch on the units to use them.
Wireless LAN Transmitter Features
Frequencies range
Maximum output
power
2400 - 2483.5 MHz (CH1-CH13)
< 100 mW
5150 - 5250 MHz (CH36 - CH48)
< 200 mW
5250 - 5350 MHz (CH52 - CH64)
< 200 mW
5470 - 5725 MHz (CH100 - CH140)
< 200 mW
Restrictions by country
This instrument is intended for home and office use in all EU countries (and other countries using the relevant
EU guidelines). The 5.15 - 5.35 GHz band is restricted to indoor use in EU countries.
Landscape
Restrictions
Bulgaria
A general permit is required for outdoor uses and utilities
Italy
If it is used outside its own premises, a general permit is required. Public use is
subject to the general authorisation of the relevant service provider.
Greece
Indoor use only for the band from 5470 MHz to 5725 MHz