10
11
PRIME Mini Dash Cam User Manual
Basic Operation Procedure
1)
Preparing for video recording
• If you connect the power supply and turn on the power button with the SD card inserted
in the main body, the LED is turned on and Voice announcement is come out.
2)
Normal recording
• All images during driving are recorded in the unit of minute and saved in SD card.
• If the SD card capacity is exceeded during uninterruptible recording, the device starts to
overwrite the existing files starting with the oldest.
• Make sure to wait until the LED is completely off before removing the SD card from the product.
3)
Event recording
• If a shock is detected during Uninterruptible recording, the image is stored separately in
the EVENT folder.
(Impact sensitivity is configurable in the mobile app.)
• The storage time is at least 1 minute to 3 minutes before / after impact detection.
• During shock detection recording, event sound is generated
4)
Parking recording(only when uninterruptible power is connected)
• When switching to the parking mode, a voice announcement saying “Parking mode is set”
is issued.
• If the acceleration sensor detects vibration, impact, or motion, the set frame is stored
separately in the PARKING folder
• To protect the vehicle battery, it has a battery discharge prevention function that
automatically terminates recording when the voltage drops below the specified voltage
and reduces battery discharge by turning off the power.
(Discharge prevention settings are available in the mobile app.)
LED functions
No. Description
On
Off
Blinking
1
Wi-Fi
Wi-Fi dongle connected
Wi-Fi dongle not connected
Mobile app
connected
2
SD card 1
SD card 1 connected
SD card 1 not connected
Malfunction
3
SD card 2
SD card 2 connected
SD card 2 not connected
Malfunction
4
Front camera
Front camera 1 con-
nected
Front camera not con-
nected
5
Rear camera
Rear camera 2 connected Rear camera not connected
N/A
Main
-
-
In operation
Button functions
No.
Function
Operation Status
Switch A
Voice Recording
On/Off
Press the button 1 time
SD Card Format
Press and hold the button until hearing the beeping
sounds 10 times.
Switch B
Event Recording
Press the button 1 time
Factory Reset
Press and hold the button until hearing the beeping
sounds 10 times.
• Event recording function
: If you press the event button, the driver can save the desired image
in the event folder.
