Chengdu Ebyte Electronic Technology Co.,Ltd.
【
RS485
⇌
WiFi
】
NA611 User Manual
Copyright ©2012–2021
，
Chengdu Ebyte Electronic Technology Co.,Ltd.
5
connect to the device server.
(6) Restart the device.
Figure 2-3-3 Connecting the device
Use the WIFI name and password queried by XCOM to connect to the device. After the connection is successful, the
LINKA on the device will light up.
2.3.2 Device testing
Next, we use the network debugging assistant "NetAssist" to test the connection.
Steps
：
(1) Select the network card where the WIFI is located and modify the configuration parameters of IPV4. The
network segment where the computer is located must be consistent with the device, as shown in Figure 2-3-4.
(2) Open the network debugging assistant "NetAssist", select the TCP Client mode, the remote host address is
"10.145.45.1", the port number is "4001", click connect, as shown in Figure 2-3-5.
(3) The LINKB light of the device will light up after the connection is successful.
Figure 2-3-4 Computer parameter configuration
Summary of Contents for NA611
Page 1: ... RS485 WiFi NA611 NA611A ...
