Chengdu Ebyte Electronic Technology Co.,Ltd.
【
2DI+2AI+2DO
】
MA02-AACX2220 User Manual
Copyright ©2012–2021
，
Chengdu Ebyte Electronic Technology Co.,Ltd.
18
Figure 4-3-1 Device address
The default device address is: 32 (hardware address 31 + software address 1 = device address 32).
Device address setting range: 1
～
247.
Hardware address: realized by the dial switch (5 digits) dial setting (the factory default is 31).
Software address: It is realized by the "offset address" set by the configuration tool software (the factory default is 1).
For example:
If the hardware address is set to 5 and the software address is set to 113, the device address is 118.
4.3.2 Hardware address (dip switch)
Figure 4-4-2 Hardware address (Dip switch)
Hardware address: The DIP switch can switch different hardware addresses, and the binary system represents the 5-digit
DIP switch.
The "5" direction indicates the high position, and the "1" direction indicates the low position. The hardware address range
can be adjusted from 0 to 31.
Hardware address dialing setting instructions:
Example 1: Set hardware address 0 (default), binary code.
