background image

 

Copyright ©2012–

2017

Chengdu Ebyte Electronic Technology Co.,Ltd                                                                                                                                                     

 

 

 

 

 

User Manual

 

General introduction   

LoRa SX-1276 1W module is a small-sized Sub 1GHz LoRa

TM

 SMD wireless module designed by Chengdu Ebyte, based on the original 

imported RF chip SX1278/SX1276 from SEMTECH, supporting LoRa Spread spectrum technology, which brings longer transmission 

distance and has the advantages of concentrated power density and strong anti-interference. 

The 30dBm module with PA(power amplifier) and low-noise amplifier enhanced the communication stability and communication 

distance; The 20dBm module integrated the industrial crystal oscillator, accuracy is less than 10ppm, with stable batch production, and 

widely used for utilities, IOT transformation and smart home, 

The related RF parameters can get through the domestic and overseas certification, such as FCC, CE, RoHs etc., satisfying export 

demand. 

Model No. 

RF IC 

Operating 

Frequency 

Transmitting Power 

Communication 

distance 

Packaging 

Antenna type 

MHz 

dBm 

km 

LoRa SX-1276 

1W module 

SX1276 

902~928 

30 

10.0

 

SMD 

Stamp hole 

/IPEX 

LoRa SX-1276 1W module series module is a hardware platform. Without any program, users need to conduct the secondary 

development. 

 

 

 

 

 

 

 

 

Summary of Contents for LoRa SX-1276 1W










Reviews: