Ebyte EA01-SG, User Manual

Page: 22 / 28

C
hengdu Ebyte Electronic Technology Co., Ltd. EA01-SG UserManual
Copyright ©2012–2020
，C
hengdu Ebyte Electronic Technology Co., Ltd
21
AT+GNSSCMD=<NMEACMD><NEWLINE> OK
AT+GNSSCMD<NEWLINE> OK
COMMAND LIST

This at Instruction Is Mainly Used To Configure The GNSS Command Parameters, And The Details Of The
Command Parameters Are Shown In The GNSS Command Manual,

Parameter Configuration Instructions: , For The Details Of The GNSS Command, See The GNSS Command Manual.
For Example: at + GNSSCMD=$Pgkc030,1,1 * 2C
4.2
C O N F I G U R E T H E N M E A S T A T E M E N T FO R T H E a t SE R I A L
PO R T O U T P U T
AT ORDER RESPONSE
AT+NMEAPRINT=<NMEA_ITEM><NEWLINE> OK
AT+ NMEAPRINT<NEWLINE> OK
NMEA ITEM

The AT Instruction Mainly Configuration at Serial Port Output NMEA Statements Mainly Includes GLL, RMC, VTG, GGA, GSA,
GSV And Other Statements

Parameter Configuration Instructions
：
<NMEA_Item>
，
Select The Output NMEA Statement, Null Means No Output Statement, GLL / R M
C/VTG / GGA / GSA / GSV Indicates The Output Corresponding Statement, The Default Is Null.
For Example
：
AT + NMEAPRINT=GLL / RMC / GSA, Indicating The Output Statement Such As GLL
RMC GSA.
AT+NMEAPRINT=GGA/GSA/GSV,Representing The OutPut Statement Such As GGAGSAGSV.
4.3
C O N F I G U R E H O W T H E N M E A S T A T E ME N T I S O U T P U T
AT ORDER RESPONSE
AT+NMEAOP=<MODE><NEWLINE> OK
AT+ NMEAOP<NEWLINE> OK
NMEA OUTPUT MODE: <MODE>

This AT Instruction Mainly Configures The Output Mode Of The NMEA Statement. Select The at Serial Port Output Or The
Socket Output.

Parameter Configuration Instructions
：
<Mode>
，
0 Represents The at Serial Port Output, And 1 Represents The Socket Channel
Output.Default at Serial Port Output.
4.4
C O N T R O L T H E G N S S P O W E R SU P P L Y
AT ORDER RESPONSE
AT+GNSSVCC=<MODE<NEWLINE> OK
AT+GNSSVCC<NEWLINE> OK
GNSS POWER MODE:<MODE>