Chengdu Ebyte Electronic Technology Co.,Ltd.
E180-ZG120B User Manual
Copyright ©2012–2020, Chengdu Ebyte Electronic Technology Co.,Ltd.
33
Similarly, the routing node and the end-device node also join the ZigBee network according to the appeal method. If
the node type does not need to be added to another ZigBee network, the Enter button
next to the node type
configuration also needs to be clicked. Write the parameters after modifying the network parameters, and finally restart to
join the new ZigBee network
7.3 ZigBee Network communication test
7.3.1 Unicast test
7.3.1.1 Unicast between end-device and coordinator in the form of short address
Enter the configuration mode, configure the target network address, and modify the target network address of the coordinator to
the local short address (0xFCFA) of the end-device. The destination network address of the end-device is 0 by default. 0 is the
coordinator's network short address (the coordinator's network short address is always 0). It does not need to be modified at this time.
If the end-device communicates with the non-coordinator node, it needs to be modified (modified to the destination node's network
local short address).
