Chengdu Ebyte Electronic Technology Co.,Ltd.
E180-ZG120B User Manual
Copyright ©2012–2020, Chengdu Ebyte Electronic Technology Co.,Ltd.
28
Take effect once restart
Note: Only the connected device holding the same link key (LinkKey) as the trust center (coordinator) can it connect to
the network of the trust center (coordinator), and the trust center (coordinator) transmits the network key to the connected
device , The connected device completes the process of joining the network to obtain the network key for normal
communication.
6.6.31 firmware version number
Firmware_version:
EF 32 02
EF 32
means EFR32 chip
02 means firmware version number
7.Quick start
7.1 Quickly build ZigBee network
Quickly and easily establish a ZigBee network via PC software. The steps are as follows:
（
1
）
Connect Zigbee ad hoc module via USB to UART converter, Open host computer software “ E180-ZG120B-Setting ” , select
Com port and set baud rate as 115200(default), then open port.
（
2
）
After the serial port is opened, first click “Enter Configuration Mode”, the message box prompts “Enter the
configuration status successfully, read parameter successfully”. The main network parameters include: the node type
defaults to the end-device, channel 11(default), PAN ID random (default), transmit power is 10 (default).
