Ebyte E104-BT52, User Manual, Page: 22 / 38

Copyright ©2012–2022
，
Chengdu Ebyte Electronic Technology Co.,Ltd 18
6.4.17 AT+MINOR iBeacon Minor command
Command Response
Inquiry AT+Minor? +OK=[para]
Set AT+Minor=[para]
+OK
：
success
+ERR=[NUM]
：
error
Parameter
para(ACSII)
：
0X0001-0XFFFF
default
：
Note
1. Take effect immediately (if the broadcast is not turned on, or it is connected, it will take effect next time),
save when power off;
2. Only the slave device supports broadcasting, other roles can still be configured;
6.4.18 AT+IPWR revise ibeacn tx_power
Command Response
Inquiry AT+IPWR? +OK=[para]
Set AT+ IPWR =[para]
+OK
：
success
+ERR=[NUM]
：
error
Parameter
para(HEX)
：
0-0XFF
default
：
0
Note
1. Take effect immediately (if the broadcast is not turned on, or it is connected, it will take effect next time),
save when power off;
2. Only the slave device supports broadcasting, other roles can still be configured;
6.4.19 AT+NAME advertising device name
Command Response
Inquiry AT+NAME? +OK=[para]
Set AT+NAME=[para]
+OK
：
success
+ERR=[NUM]
：
error
Set
（
Do not save
）
AT+NAME1=[para]
Parameter
para(HEX): advertising device name,
Advertising device name is not more than 22 bytes
default
：
E104-BT52-V2.0
Note
1. Take effect immediately, save when power off;
2. Only supported by the slave, other roles can still be configured;
6.4.20 AT+ CONINTV connection interval configuration
Command Response