![Ebyte E103-W03 Product Instruction Manual Download Page 10](http://html1.mh-extra.com/html/ebyte/e103-w03/e103-w03_product-instruction-manual_3841760010.webp)
Chengdu Ebyte Electronic Technology Co.,Ltd.
E103-W03 User Manual
Copyright ©2012–2021
,
Chengdu Ebyte Electronic Technology Co.,Ltd.
10
37
GPIO17
IO
General IO port
38
GPIO22
IO
General IO port
39
GPIO28
IO
General IO port
40
TDI
I
JTAG emulation pin
41
TDO
O
JTAG emulation pin
42
TCK
I
JTAG emulation pin
43
TMS
IO
JTAG emulation pin
4. Recommended Wiring Diagram
Notice:
1. The power supply must be guaranteed to be 2.3V~3.6V. In order to ensure the stable operation of the module, the
RF transmission power will be affected by factors such as the response speed of the LDO. If there is a higher requirement
for the communication distance, it is recommended to select an external LDO with a power supply capacity greater than
600mA. powered by.
2. The RXD/TXD of E103-W03 is connected to the MCU_TXD/MCU_RXD of the external MCU respectively.
3. When powering on, the SOP1 pin needs to be connected to a 10K pull-up resistor, and SOP0 and SOP2 are
connected to a pull-down resistor (the module has already connected SOP0 and SOP2 to the pull-down, so it will not be