Chengdu Ebyte Electronic Technology Co.,Ltd.
Copyright ©2012–2020
,
Chengdu Ebyte Electronic Technology Co., Ltd
3
Chapter1. Overview
1.1 Brief introduction
E01C-ML01SP2 is a small size, self-contained PCB antenna and a 2.4GHz patch
type wireless module with a maximum transmission power of 100mW based on the
domestic SI24R1.
Built-in power amplifier (PA) and low noise amplifier (LNA) on the original basis,
so that the maximum transmission power reaches 100mW, while the receiving
sensitivity is further improved, and the overall communication stability is less than
there is no power amplifier and low noise amplifier The products have been greatly
improved.
This product has obtained FCC, CE, RoHS and other authoritative certification reports at home and abroad, and uses
industrial-grade high-precision 16MHz crystal oscillator.
Since E01C-ML01SP2 is a pure radio frequency transceiver module, it needs to use MCU driver or use a dedicated SPI
debugging tool.
1.2 Features
Ultra-small size, only 12.8x25mm;
RFX2401C power amplifier scheme, the maximum transmission power is 100mW, and the software is multi-level
adjustable;
Under ideal conditions, the communication distance can reach 1.8km;
At the same time, it has PCB onboard antenna and IPX interface, users can choose to use according to their own
needs;
Professional radio frequency shield, anti-interference and anti-static;
Support the global license-free ISM 2.4GHz frequency band;
Support 2Mbps, 1Mbps and 250kbps air rate;
125 communication channels to meet application requirements such as multipoint communication, grouping, and
frequency hopping;
Connect with MCU through SPI interface, rate 0
~
10Mbps;
Support 2.0
~
3.6V power supply, power supply greater than 3.3V can guarantee the best performance;
Industrial standard design, support -40
~
+85℃ long time use
;
1.3 Application
Wearable device;
Smart home and industrial sensors, etc.;
Security system, positioning system;
Wireless remote control, UAV;
Wireless game remote control;