manualshive.com logo in svg

Ebtron ELF/D Series, Installation, Operation And Maintenance Manual, Page: 1 / 12

Share
Download
Ebtron ELF/D Series Installation, Operation And Maintenance Manual Download Page 1

TM_ELF-D_R1F

Installation, Operation and Maintenance Technical Manual

ELF /D Series

Dual Analog Output Electronic Low Flow

Airflow and Temperature Measurement Station

/D Series

For the following models:

ELF-XXXX/D00

: DUAL 0-10/2-10VDC ANALOG OUTPUT (FLOW & TEMP) WITH FLOW INTEGRATION

ELF-XXXX/D01

: DUAL 0-5/1-5VDC ANALOG OUTPUT (FLOW & TEMP) WITH FLOW INTEGRATION

ELF-XXXX/D02

: DUAL STAEFA EQUIVALENT OUTPUT (FLOW & TEMP) WITH FLOW INTEGRATION

ELF-XXXX/D03

: DUAL 0-10/2-10VDC ANALOG OUTPUT (FLOW & TEMP) AND NO FLOW INTEGRATION

ELF-XXXX/D04

: DUAL 0-5/1-5VDC ANALOG OUTPUT (FLOW & TEMP) AND NO FLOW INTEGRATION

Document Name: TM_ELF-D_R1F

Thermal Dispersion Airflow Measurement

®

Thermal Dispersion Airflow Measurement Technology

ELF /D Series

Dual Analog Output Electronic Low Flow Measurement Station

Technical Manual - For ELF /D Series 

Part Number: 930-0190

EBTRON

, Inc. 1663 Hwy. 701 S., Loris SC 29569 

• 

Toll Free: 800.2

EBTRON

(232.8766) 

• 

Fax: 843.756.1838 

• 

Internet: 

EBTRON

.com

Summary of Contents for ELF/D Series













Reviews:

No comments