PX200NB
–
Manual
Page 9 / 57
3.
ASSEMBLY AND WIRING
3.1.
PX200NB COMMUNICATOR
Fig. 1. Connecting the PX200NB communicator
Connections of wires shall be made with due care to prevent any faults or dead shorts.
Places of connections shall be protected against weather conditions. According to the
figure 1. terminals of communicator shall be connected to:
Terminal
Connection description
AC, AC
Two terminals for AC power supply (output from AC
transformer)
GND
Device ground,
common for
other input and output
+ACU
Positive terminal of battery
