PX200NB
–
Manual
Page 39 / 57
Note:
1) For all protocols you may use following options:
o
[Enable SMS sending] which means that in case of no LTE/HSPA+
connection, data will be sent via SMS (if this mode will be accessible).
o
[Don’t transmit data when external phone line is available] which means
that when the external PSTN line is available then it will be used during
transmission from the control panel.
2) [Disable CRC checking] option may be used for ContactID format. Some control
panel generate improper messages regarding a control sum for transmitted data,
the device is not able to confirm collection of data, and as a result the panel tries to
send them again (until execution of all determined trials). Select this option to avoid
the above mentioned.
8.
MONITORING CENTRE
8.1.
TCP/IP and SMS monitoring
8.1.1.
Security
–
Encryption key
For the purpose of maximum security of transmission, data is encrypted with AES key.
This option may be used for GSM/LTE and SMS transmission.
After selection of encrypted transmission you may use your own code (256 bits
–
signs 0-9 and A-F) or use default settings.
