EBS HD360
PROFESSIONAL HIGH DEFINITION BASS HEAD
D
ESIGNED AND
D
EVELOPED BY
EBS S
WEDEN
AB
G
RINDSTUVÄGEN
44-46, SE-16733 B
ROMMA
, S
WEDEN
+46 8 735 00 10, F
AX
: +46 8 735 00 05
*
(
[email protected]
www.ebssweden.com
Users Manual
PROFESSIONAL
HIGH DEFINITION BASS HEAD
Contents:
Page:
Introduction
2
Block Diagram
3
Front Panel Controls
4
Page:
Rear Panel Connections
6
Specifications
8
INPUT:
GAIN:
CHARACTER:
COMP/LIMIT:
FILTER SECTION:
BALANCED OUTPUT:
EFFECT LOOP:
REMOTES:
LINE OUT:
POWER AMP:
AUXILIARY INFO:
Input Impedance
2 Mohms // 100 pF
Phantom Power
Optional
10 V, 20 mA max.
Gain Range
min/max
-oo/ +30 dB
Gain Peak LED
+10 dBv
Frequency Response
+0 / -3 dB
20 - 20.000 Hz
Filter:
Type
Shelving High/Low Pass
Gain:
Lo
+6 dB @ 80 Hz
Mid
-2 dB @ 900 Hz
Hi
+3 dB @ 7.5 kHz
Compressor Gain
0 dB
Attenuation
max
24 dB
Compression Ratio
max
3:1
Attack (80%)
typ
<10 ms
Release (80%)
typ
100 ms
Bass Filter:
Type
12 dB/oct. Shelving
Gain Range
+/- 18 dB @ 60 Hz
Middle Filter:
Type
Bandpass Filter
Frequency Range
50 - 5.000 Hz
Q - Boost
0.5 - 1.3
Q - Cut
0.5 - >5
Gain Range
+/- 12-15 dB
Treble Filter:
Type
Shelving
Gain Range
+/- 18 dB @ 8 kHz
Bright:
Type
Shelving
Gain Range
>15 dB @ 10 kHz
Output Level
Nominal
-10dBv
Frequency Response
+0/-3 dB
35 - 20k Hz
XLR Connections
1-GND, 2-Hot, 3-Cold
Options
GND Lift, Post EQ, Spkr Sim
Loop Signal Level
nominal
-10 dBv
Gain
Unity (1:1)
Output Impedance
<100 ohms
Input Impedance
>50 kohms // 100 pF
Phantom Power
Optional
10 V, 20 mA max.
Connections:
REMOTE
RING = Mute, TIP = Drive
FILTERS
RING = Filters, TIP = Character
Function:
Connect to GND for operation, 5 mA current for LED.
Output Impedance
<5 kohms
Signal Level
nominal
0 dBv
Continuous Output Power
@2-4 ohms
300 W RMS
Dynamic Output Power
350 W peak
Power Requirements
max
400 W
Mains Protection:
T3.15 Fuse (230V)
T6.3A Fuse (100/120V)
Dimensions (WxDxH)
max
48 cm x 33 cm x 9 cm
19” x 13” x 3.5”(2U)
Weight:
9 kg ( 20 lbs.)
Specifications are subject to change without notice!
SPECIFICATIONS
May 2012
