30
EN
EBS Ink-Jet Systeme
20080908#3.0
EN
Parameter Description
Nozzle diameter
150µm
as standard
optionally: 120µm, 170µm, 200µm.
Print height
27 mm
Height of objects to be labelled
from 70 mm
(contact with both rolls),
from 35 mm
(contact with the lower roll
to print with for example 7 nozzles only -
see figure
A guide and rolls can be used optionally
to support rectilinear printing; they are
most useful for line printing, for labelling
pipes, barrels and other cylindrical ob-
jects.
Working position in 3D space
any
Number of text lines per run
1
Line printing
Supports printing of up to 10 texts in
successive lines.
Maximum number of characters
per text
1300
(including control characters for
the printer’s built-in fonts).
Number of texts and accompa-
nying print-parameter
(stored in
the printer’s memory at the same
time)
from 1
to 10
. Texts are loaded to the
printer via a PC.
from 1
to 30
Optionally.
Printing of graphics (logo, spe-
cial graphics characters )
Ability to edit and print text and graphic
symbols with the application of Win-
dows
®
fonts (True Type fonts) as well as
with a bitmap editor, as standard.
Special characters
National (diacritical) characters, graphic
characters for information, warning,
transport and other purposes (a charac-
ter set defined by the manufacturer), etc.
Variable fields
(texts whose con-
tents vary dynamically according to
occurrence of a specific event)
Date and time in any format, expiry date,
incremental or decremental counters.
