20080908#3.0
EBS Ink-Jet Systeme
EN
21
EN
encoder rotate (rotational speed
converter).
•
Internal generator - set the
Impulse generator
parameter to
Fixed speed
.
!
The program makes it impossible to set
the
Fixed speed
parameter unless the
EBS-250 Safe mode
option in the
Tools
menu, the
Preferences
submenu is
unchecked. This limit has been set in order
to reduce the risk of accidental print
release – if the
Fixed speed
and
Text
repetitions
-
Continuous
parameters are
set, the printer starts printing as soon as
printing is enabled with button
ON/OFF
!!!
When printing is timed by an internal
generator, the print rate is not synchro-
nised with the printer travel rate.
Inverting and Reversing a Text
The directions are defined as the
printer "sees" them.
Select the
Upside down
parameter in
order to make the print look like it is
turned over.
Select the
Reverse
parameter if you
need to label objects by moving the
printer from the right-hand side to the
left-hand side.
!
The following examples can be used
in practice when the
Shaft direction
parameter is set to
Disabled
(this
parameter is available in the
Advance
tab sheet after the
Adv.
options
box has been ticked).
the printer
travels from
left to right
or from right
to left
The reverse or inverse printing op-
tions can also be used to make prints
on transparent surfaces and the prints
need to be legible from the other side
(mirror images in the vertical or hori-
zontal directions).
Select the
Upside down
and
Reverse
parameters in order to make
proper prints when objects to be la-
belled are positioned upside down.
the printer
travels from
left to right
Reversed
view of the
print
Repeating a Text (Repetition)
The
Text repetitions
parameter
defines how many times printing
needs to be repeated from the start
point, after the printing has been
initiated with release button
. You
can print a text repeatedly on one
object - this is a so called text repeti-
