EBS Ink Jet Systeme GmbH
D-51588 Nümbrecht, Germany, Alte Ziegelei 19-25
++49 (0)2293/939-0
++49 (0)2293/939-3
e-mail: [email protected]
20
20140417#2.2
edited on 2014.04.17
3
1. General Information
The
BOLTMARK
®
series consists of the following INK-JET printer models:
- the low investment printer for common applications.
- the all-round model printer with full printing options.
- the new standard in high-speed marking solutions.
The table below shows a comparison of the primary parameters of the
BOLTMARK
®
-series models men-
tioned above.
Tab. 1.1
MINI
/
16
dots
MIDI
/
25
dots
Maximum height of
vertical row (H
max
)
MAXI
/
32
dots
One
5x5
line
Two
5x5
lines
Three
5x5
lines
Four
5x5
lines
Five
5x5
lines
One
7x5
line
Two
7x5
lines
Three
7x5
lines
Four
7x5
lines
One
9x5
line
Two
9x5
lines
Three
9x5
lines
One
11x7
line
Two
11x7
lines
One
14x9
line
Two
14x9
lines
One
16x10
line
One
21x15
line
One
25x15
line
Examples of matrices
(The matrices listed are
available for
the
MIDI
printers as well as
MAXI
printers)
One
32x18
line
1D
codes
Bar codes available
2D
code (Data Matrix)
to run over
4000
hours (18 months)
to run over
6000
hours (18 months)
Type of iModule
®
to run over
8000
hours (18 months)
Print height [mm]
1.4 - 12
1.4 - 12
1.2 - 9
Distance between the head and product [mm]
0 - 30
0 - 30
0 - 15
The symbols used in the above given table have the following meanings:
- YES (available)
- NO (unavailable)
- available as an option
- YES (available as standard but with limitations)
The complete information on the printer’s features; installation, configuration and operation is contained in
The
BOLTMARK
®
-series
Printer User’s Manual.
This document contains only the basic information on how to
start and stop the
BOLTMARK
®
-series printer, enter a text to be printed, print the text, exchange a (solvent or
ink) bottle, replace iModule
®
as and when necessary, and keep the head clean.
