EBS EBS 2600, User Manual

Page: 80 / 184

80 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
5.1.5. USING THE OBJECT MANAGER
The object manager consists of three parts (sheet tabs):
– | |: List of all objects in the project,
– | |: Clipboard,
– | |: Trashcan.
Press in the project editor window to start the object manager.
List of objects
Press | | in the object manager window to display the list of objects.
The list contains all objects used in the project, including the objects that are invisible in the editor
window because:
– Their position in the project expands beyond the editor window,
– They are veiled by objects that are not set to be transparent.
The position of an object on the list relative to other objects defines whether the object is “on top”
or “beneath”.
The following functions are available on the list of objects in the object manager:
Icon Function
Delete the selected object (move the object to the trashcan).
Copy the selected object to the clipboard.
Edit contents or parameters of the selected object.
Move the selected object on the list by one position up.
Move the selected object on the list by one position down.
Clipboard
Press | | in the object manager to display the clipboard.
The clipboard contains all objects that have been copied to it with the function in the project
editor. The clipboard has global reach, that is, it shows objects copied to any project. Owing to that,