manualshive.com logo in svg

EBS EBS 2600, User Manual

Share
Download
EBS EBS 2600 User Manual Download Page 162

162 of 184

EN

EBS‑2600 User Man

ual

G2023/04/26_1EN

2023.05.16

9.1.3. 

INFORMATIONAL MESSAGES

Informational messages (see drawing) are displayed in the dialog 
box when the necessity to inform the user of the existent situation 
arises or when the user is expected to decide on further actions.
Printing may be turned on/continue.
The printer does not change its status.

The handling of an informational message depends on whether the occurrence of the message in

-

volves the necessity for the user to decide on further actions or not.

If an informational message is displayed to inform the user of the existent situation:

 

–

View the contents of the message.

 

–

Press 

 to acknowledge the message or 

 to display more details about the message.

If an informational message is displayed to prompt the user to make a decision on further actions:

 

–

View the contents of the message.

 

–

Make a decision on further actions by pressing the relevant button, 

e.g

. 

 or 

.

 

–

The printer carries out an appropriate operation, 

e.g.

 restarts itself.

Summary of Contents for EBS 2600

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands