EBS EBS 2600, User Manual

Page: 161 / 184

161 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
If an error message is displayed due to an error in the printer ( e.g. the empty ink bottle)
and the printer automatically goes into an error state:
– View the contents of the error message.
– Press to acknowledge the message or to display more details about the error.
– Take an action that is adequate for the message, e.g. install a new bottle of ink.
– Press to delete a single message or to delete all messages.
The printer goes out of the error state.
Message deleting is not available to operator ‑type users.
– If the error pauses printing, resume printing.
9.1.2. WARNING MESSAGES
Warning messages (see drawing) are displayed in the dialog box
when a condition that requires user intervention occurs.
When the dialog box containing a warning message is displayed,
the display background flickers yellow.
Warning messages concern:
– A situation that has occurred in the printer and requires user
intervention,
e.g. prints are triggered too fast.
The printer goes into a warning state where:
Printing may be turned on/continue,
An optional status beacon glows yellow.
– A situation that may arise from the operation currently carried out by the user.
The printer
does not go into a warning state.
If a warning message is displayed, the handling procedure depends on the reason.
If a warning message is displayed due to a situation that has occurred in the printer and requires
user intervention (
e.g. when prints are triggered too fast) and the printer automatically goes into
a warning state:
– View the contents of the warning message.
– Press to acknowledge the message or to display more details about the warning.
– Take an action that is adequate for the message, e.g. set an appropriate interval between
the moments when successive prints are triggered.
– Press to delete a single message or to delete all messages.
The printer goes out of the warning state.
Message deleting is not available to operator ‑type users.