EBS EBS 2600, User Manual

Page: 114 / 184

114 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
the parameter | | Position .
The Line divider ‑type object is shown in the project editor window as a vertical, light
blue line of maximum height.
5.4.4.4. CREATING/EDITING A
SPACER
‑TYPE OBJECT
Use a Spacer ‑type object to add a space in the form of a defined number of blank columns
(vertical rows) to a project.
Blank columns generated by adding a Spacer ‑type object to a project are not included in
the project width limit of 4000 columns .
To create a Spacer ‑type object :
1. Press | | .
2. Set the parameters that are specific to the Spacer ‑type object .
Parameter Range of settings
| | Position
Position of an object in a project; the horizontal coordinate ( X ).
| | Distance
0 to 2147483647
Number of blank columns (vertical rows) added to a project at the point where
a Spacer ‑type object is inserted.
3. Press to acknowledge.
The Spacer ‑type object is created in the project and its position is defined by the param -
eter | | Position .
Regardless of the value of the parameter | | Distance , a Spacer ‑type object is
shown in the project editor window as a vertical violet line of maximum height and constant
width.
5.4.4.5. CREATING/EDITING AN
INTENSIFIER
‑TYPE OBJECT
Use an Intensifier ‑type object to modify intensity of a print from the point where the ob -
ject is added to a project to the end of the printout or the occurrence of a consecutive
Intensifier ‑type object .
If a project does not contain a Intensifier ‑type object , the entire project is printed with
intensity given with the project parameter | | Dot size .
The maximum achievable intensity of prints depends on printing speed. If print intensity is too
high for a given printing speed, the printer generates a sound signal to signal the error (provid
-
ed that an appropriate warning is set up, see “7.3.2. Sound Signal Settings” ) and then reduces