EBS EBS 2600, User Manual

Page: 107 / 184

107 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
Parameter Range of settings
| Advanced | On data process
Do nothing , String , ASCII code , Return
received data
The parameter is available only if | | Expert settings : .
Data that is sent from the printer to the external device when the printer triggers printing
of a project containing a Communications port ‑type object :
- Do nothing : the printer sends no data,
- String : the printer sends the data defined with the Reply to be sent parameter,
- ASCII code : the printer sends the character defined with the Reply to be sent parame -
ter,
- Return received data : the printer sends back the same data that it received from
the external device.
3. Set the other parameters of the text object | |.
For more details about the parameters that are common to all objects see “5.2.1. Common
Parameters of All Objects” .
For more details about the parameters that are common to text objects | | see “5.4.2.1.
Common Parameters of Text Objects” .
4. Press to acknowledge
The Communications port ‑type text object is created in the left top corner of the proj -
ect.
5.4.2.6. CREATING/EDITING A TEXT FILE ‑TYPE TEXT OBJECT
With a Text file ‑type text object you can add the contents of a text file to a project.
Before a text file is used in a project, it must be imported to the printer via the text file manager
available in the EBS Web User Interface .
To create a Text file ‑type text object :
1. Press | | .
2. Set the parameters that are specific to the Text file ‑type object .
Parameter Range of settings
| | File path
Indicate the name of a text file from among those available in the printer.
|
| Line count
1 to 10 , All
Number of text lines to be added to an object from a text file.
If
All is selected, all text lines limited with the values of the | | Line start value and |
| Line maximum value parameters are added to the object.
| | Line step
1 to 50
Number of lines, by which the text file data shifts each time a consecutive print is made.
If the value of the
Line step parameter is smaller than the value of the | | Line count
parameter, the data shifts by the value of the | | Line count parameter.