CPX200NB ALARM CONTROL UNIT – INSTALLER MANUAL
13 / 116
3.4.
CONFIGURATION OF WIRED INPUT LINES
All wired input lines are fully configurable and can operate as normally closed (NC)) or
normally open (NO) as well as with assigned parameters (EOL-NO or EOL-NC) using 2.2kΩ
resistors or with assigned double parameters (DEOL-NO or DEOL-NC) using 1.1kΩ resistors.
Both resistor types are included in the delivery of the control unit. Various configurations of
input lines are presented in the drawing 3.
Drawing 3. Configuration of input lines
