EBS-6200
Printer User's Manual
Chapter 4 - Operating the Printer
74
200
4.4.6.1. Checking
Ink is fit for use o
expiry of the time limit is indicated on the terminal:
Expiry
Dates
ver a limited time and the
From that moment till the moment the ink bottle is replaced with a new one, no printing is possible in
order to avoid any damage to the ink system.
The service life is coded in the transponder and can be displayed and viewed on the terminal at any
time in the following way.
In the main MENU select the
BOTTLE INFORMATION
item and then the
INK EXPIRE DATE
item.
The message indicating the expiry date for ink contained in the bottle that is attached to the ink
system is then displayed on the terminal.
!
The validity date can be checked provided that the current date has been set in the printer properly.
If
the date has been set back, no printing can be made
. Any attempt to start printing results in an
error message.
NOTE:
•
After the date has been set back, all bottles are ignored
! No validation or printing can be
resumed until the proper date is set in the printer.
•
set the date ahead because any subsequent attempt to set the pro er date will be
91020#1.0
Do not
p
recognised as setting back with the above mentioned consequences.
4.4
Every new bottle of solvent is assigned a time limit and after the expiry of the time limit the bottle is
considered unsuitable even if it is not empty. Therefore do not refill an empty bottle with solvent, as
IMS
will soon consider the bottle unsuitable anyway. During normal operation of the printer the bottle
is always emptied before the time limit expires.
In order to check how much time remains until the time limit expires, follow the procedure below. In
the main MENU select the
BOTTLE INFORMATION
item and then the
SOLVENT - TIME TO WORK
item.
The
con
If th
4.4
ssing Ink Monitoring System Data
You sometimes need to access information that is stored and validated by the Ink Monitoring System
(
IMS
). Such a need occurs especially with clients who operate
EBS
printers with various inks and/or
ink systems.
In the main MENU select the
BOTTLE INFORMATION
item and then the
PRINTER/INK/SOLV. TYPE
item.
!
.6.2. Printer Operation Time vs. Solvent Consumption Time Limit
terminal shows the time (a number of hours and minutes) till the expiry of the solvent
sumption time limit.
!
e time limit is exceeded, the no solvent condition is observed in the printer.
.6.3. Acce
Summary of Contents for EBS-6200
Page 1: ...EBS 6200 USER S MANUAL Ink Jet technology for the future...
Page 2: ......